The most compact servo driven labelling head available anywhere

 ..... with this performance!

 
ALH500 Standard labeling head

The illustration shows a very common Aesus ALH500 Servo Head .... economic and compact.

The unwinder and the rewinder are mounted directly onto the base and operate without a separate drive.

Labeling head ALH500-124 L,
Showing label roll holder with roll diameters up to 12" (310 mm)

1 Rewinder
When the labels have been peeled off, the backing tape is rewound. The swing lever and an integrated coupling device enables the backing tape to be consistantly tensioned.

2 Unwinder
Handles label roll diameters up to 12" (310 mm) (optionally 16" [410 mm]) outside diameter. The swing lever and an integrated brake mechanism maintains constant tension of the label web.

3 (Label roll) core retainer
By turning the handle, the core of the label roll is tightened and released again.

4 Base drive unit
Cast aluminum chassis class IP66, NEMA 250 type 12 including the highly dynamic and high-torque servo motor.

5 Operation panel
3.5“ LCD color touch display that can be rotated 180° if the application needs it.

6 Mounting points
on 30 mm diameter bars. Allows vertical (or Horizontal) adjustment of the label head 90 degrees to the label dispense direction.

Aesus ALH 500 Servo Label Head Specifications...Learn More Click here

The next illustration shows an IXOR with a motor-driven unwinder and a motor-driven rewinder, to handle large label rolls.

Labeling head with motor-driven winders

Labeling head 124 L, picking up label roll diameters up to 410 mm

Labeling head ALH500-124 L,
Showing label roll holder with diameters up to 16" (410 mm)

7 Motor-driven unwinder
Can handle label rolls up to 16" (410 mm) (optionally 20" [510 mm]) maximum outside diameter. An integrated, brushless torque motor rotates the label roll and unwinds the label web gently according to the swing lever position.

8 Fixing bar (Mounting plate)
Extention plate to hold all the units: base unit and motor-driven winders

9 Deflection rollers
to guide the label web from the motor-driven unwinder to the base unit. Diameter 38 mm as pictured above

10 Motor-driven rewinder
When the labels have been peeled off, the backing paper is rewound. The swing lever and an integrated brushless torque motor enable the backing paper to be uniformly tensioned at speed.

11 Mounting points
on 30 mm diameter bars. Allows vertical (or Horizontal) adjustment of the label head 90 degrees to the label dispense direction.

12 Peel-off plate
is configured application-specific with the help of a comprehensive construction kit.

Aesus ALH 500 Servo Label Head Specifications...Learn More Click here




Perfect for the Role!

A very popular feature is the twist on/twist off Core and rewind holders.

Just twist a knob and the core is released to load fresh Labels. The same system for the backing paper.




Intelligent Label Sensing...Learn More Click here

Aesus ALH 500 Servo Label Head Specifications...Learn More Click here